Webinars

Recalcitrant chemicals like PAH, PCB’s, Dioxins, PFAS, and Mercury, are hard to treat using traditional remediation methods. Sites with these contaminants are nearly unaffected even by thermal treatments at the boiling point of water. However, when we use our Thermal Conductive Heating technology, we can reach target temperatures well above 300 °C and thereby treat these persistent compounds. Join our free webinar, where the experienced team of TerraTherm and KrugerVeolia experts will discuss:

• Where high-temperature remediation is applicable
• Which chemicals can be targeted
• What results can be achieved
• Tailoring of implementation approaches and specific sites examples
• In situ and ex-situ case study examples.

Doing high-temperature remediation is not a simple task but done correctly, you can reach amazing results. We will touch on challenges, pitfalls and lessons based on our 20 successfully completed high-temperature project.

When a manufactured gas plant (MGP) site is identified for treatment, the typical remediation approach can be expensive and involve hazards for crews and the community. Any time you excavate contaminated soil and transport it for treatment or disposal, you are introducing potential safety and liability issues.

Luckily, in situ thermal remediation (ISTR) is often a safe and cost-competitive alternative.

In this webinar, Vice President of Thermal Technology John LaChance will briefly introduce the primary ISTR technologies, their applicability, and their primary removal mechanisms at MGP sites. He will discuss the key design considerations for varying conditions and remedial goals, and present a real-life example of an MGP site that was recently remediated with ISTR – including analysis and discussion of the potential role in situ smoldering may play at some sites in the removal of creosote/coal tar. John will also cover projects where the goal was not complete removal but volatilization of the low boiling point compounds and in situ immobilization of the high boiling point compounds, such as heavier range TPH and PAHs.

What do coal tar, PAHs, PCBs, pesticides, dioxins, PFAS and mercury all have in common?

They’re all recalcitrant chemicals that are hard to treat using traditional remediation methods. Sites with these contaminants are nearly unaffected even by thermal treatments reaching the boiling point of water. Luckily, high temperature thermal conductive heating (TCH) can reach temperatures of more than 300°C, high enough to address these difficult chemicals.

In this webinar, TerraTherm’s Steffen Griepke will discuss where high temperature thermal is applicable, what chemicals can be targeted and what results can be achieved. Different implementation approaches tailored to the site specific circumstances will be presented, and both in situ and ex situ case study examples will be provided. Steffen will draw on TerraTherm’s 25 years of experience working with high temp thermal projects to answer participant questions during the Q&A.

If you have interest in cleaning up some the most difficult chemicals out there, this is a webinar you don’t want to miss.

“How do I choose between ERH and TCH?”

It’s one of the most commonly asked questions when considering thermal remediation, and in this webinar one of the industry’s leading experts will answer it. Join TerraTherm, a Cascade Company’s Vice President John LaChance as he introduces the basic operational theory and concepts for both technologies. He’ll discuss their application to a set of typical site conditions (e.g., low and high permeability zones in unconsolidated and bedrock formations) and contaminants (e.g., CVOCs), and highlight typical design approaches, assumptions, and the pros and cons of each.

John will share real-life examples of full-scale projects involving electric resistance heating (ERH) and thermal conductive heating (TCH), including detailed breakdowns and comparisons of costs. He’ll also touch on ETDSP^TM, a form of ERH that employs active injection and extraction of water. If you have burning questions about how ERH and TCH stack up, this is your chance to get them answered.