High Temp

Heat It Up: How High Temp Thermal Tackles Recalcitrant Chemicals

What do coal tar, PAHs, PCBs, pesticides, dioxins, PFAS and mercury all have in common?

They’re all recalcitrant chemicals that are hard to treat using traditional remediation methods. Sites with these contaminants are nearly unaffected even by thermal treatments reaching the boiling point of water. Luckily, high temperature thermal conductive heating (TCH) can reach temperatures of more than 300°C, high enough to address these difficult chemicals.

In this webinar, TerraTherm’s Steffen Griepke will discuss where high temperature thermal is applicable, what chemicals can be targeted and what results can be achieved. Different implementation approaches tailored to the site specific circumstances will be presented, and both in situ and ex situ case study examples will be provided. Steffen will draw on TerraTherm’s 25 years of experience working with high temp thermal projects to answer participant questions during the Q&A.

If you have interest in cleaning up some the most difficult chemicals out there, this is a webinar you don’t want to miss.

Watch Webinar

Recalcitrant Contamination: Challenges, Pitfalls and Learnings from 20 High-Temperature Projects

Recalcitrant chemicals like PAH, PCB’s, Dioxins, PFAS, and Mercury, are hard to treat using traditional remediation methods. Sites with these contaminants are nearly unaffected even by thermal treatments at the boiling point of water. However, when we use our Thermal Conductive Heating technology, we can reach target temperatures well above 300 °C and thereby treat these persistent compounds. Join our free webinar, where the experienced team of TerraTherm and KrugerVeolia experts will discuss:

  • Where high-temperature remediation is applicable
  • Which chemicals can be targeted
  • What results can be achieved
  • Tailoring of implementation approaches and specific sites examples
  • In situ and ex-situ case study examples.

Doing high-temperature remediation is not a simple task but done correctly, you can reach amazing results. We will touch on challenges, pitfalls and lessons based on our 20 successfully completed high-temperature project.

Watch Webinar

In Situ Thermal Remediation of High Boiling Point Chemicals

The treatment of sites with recalcitrant contaminants such as PFAS, PCBs, dioxins and PAHs can feel daunting. Fortunately, there’s an effective solution for high-boiling point chemicals – In Situ Thermal Remediation (ISTR).

In this flash webinar, TerraTherm thermal experts Sam Nienstedt, Technologist, and Steffen Griepke, Vice President of Technology, will provide a brief overview of thermal remediation and share how ISTR can remove or destroy subsurface contaminants.  They explain why thermal conductive heating (TCH) is the primary ISTR technology for remediation of high boiling point chemicals. They will also discuss important design do’s and don’ts for a successful remedy, common ISTR myths, and typical costs.

There will be time for questions at the end, so bring your questions about using thermal remediation to treat hard-to-treat contaminants. This flash webinar is scheduled for 30 minutes.

Watch Webinar